Sadler 32
New engine 2017
- Boat REF# · 325412
- LOA · 9.75m
- Year · 1979
- Construction · GRP
- Underwater profile · Fin
- Berths · 6
- Engine · 1 x Diesel 25hp, Beta 25 (2017)
- Lying · Gosport
Extra Details
| Designer | David Sadler |
|---|---|
| Builder | Sadler Yachts Ltd |
| Lying | Gosport |
| Fuel capacity | 55.0 ltr (12.1 G) Total - 1 Tanks |
| Water capacity | 90.0 ltr (19.8 G) Total - 2 Tanks |
| Last survey | 08/11/2017 |
Mechanical
| Engine | 1 x Diesel 25hp |
|---|---|
| Engine make and model | Beta 25 (2017) |
| Engine Hours |
engine1= 400 |
| Engine Cooled | Indirect |
| Steering | Tiller |
| Drive | Shaft |
| Prop(s) | 3 blade fixed |
| Fuel consumption (approx) | Not Recorded |
| Cruising speed (approx) | 6 knots |
| Max speed (approx) | 7 knots |
| Engine spares |
|---|
There's a shore power cable fitted but the system has not been installed.
New engine seacocks May 2023.
Fuel consumption should read 1.2Litres per hour at 2100RPM
Dimensions
| LOA | 9.75m |
|---|---|
| LWL | 7.32m |
| Beam | 3.20m |
| Draft Min | 1.40m |
| Draft Max | 1.40m |
| Displacement | 4,760kg (10,495.8lbs) |
| Headroom | 1.83m |
| Storage | On marina |
Rig
Sloop rigged Aluminium spars () with stainless steel standing rigging (2016)
Sails
| Mainsail | - Slab () 3 Reefs |
|---|---|
| Headsail | - Furling () |
| Other sails | 2 spare genoa () |
| 1 spare mainsail () | |
| Spinnaker + snuffer () |
| Spinnaker gear |
|---|
Electrical Systems
12 volt battery, 240 shore power voltage, 3 batteries charged by: engine
Construction
| Construction | GRP |
|---|---|
| Underwater profile | Fin |
| Finish | Gelcoat finish |
The water tanks are a bag each side under the saloon berths.
All the cut teak required to replace the old stuff in the cockpit. I also have the fittings necessary to lead reef lines back to the cockpit.
Antifouled June 2023
Cabin heating fitted, owner unsure if working
Upholstery believed to have been renewed 2013
Saloon windows removed and resealed 2016
All skin fittings serviced 2021
Accommodation
| Total # of berths | 6 |
|---|---|
| No. of double berths | 1 |
| No. of single berths | 4 |
| Handbasin | 1 |
| Heads | 1 heads (Manual) |
2 burner gas cooker/stove
Accommodation
| Cooker/stove | |
|---|---|
| Grill | |
| Oven | |
| Sink | |
| Refrigerator | |
| Manual water system |
2 burner gas cooker/stove
Deck Gear
| Sail cover | |
|---|---|
| Sprayhood | |
| Warps | |
| Fenders | |
| Boathook | |
| Swim Ladder | |
| Instrument Covers |
3 halyard winches
4 sheet winches
1 anchors
(Danforth)
20.00m of chain
20.00m of warp
There is a extra kedge anchor and warp in the cockpit locker
New sprayhood and sail cover 2018
Nav Equipment
| Compass | |
|---|---|
| Speed | |
| Log | |
| Wind | |
| VHF | |
| GPS | |
| Autopilot | |
| Navigation lights | |
| Echo sounder | |
| Radar Reflector |
Complete new set of NASA Clipper instruments inc all mast head 2016
Safety Equipment
| Life jackets | |
|---|---|
| Life buoys | |
| Safety harnesses | |
| Horn | |
| Boarding ladder | |
| Emergency steering |
2 bilge pumps (1 manual / 1 Electric)
Broker's Comments
Comments from the owner:
A very nice well-maintained example of the popular Sadler32 in good condition.
Over the nine years of ownership, I have undertaken a rolling program of
updating, maintenance and improvement. This includes:-
Antifouled June 2023
All standing and running rigging (including genoa furling gear) replaced 2016
A complete new set of NASA Clipper instruments fitted 2016
All cabin windows removed and re-sealed 2016
New Beta25 engine, gearbox, propshaft, prop and all stern gear installed 2016 and
commissioned Feb 2017. Approx 100hours engine usage since then.
Replacement boom fitted 2017 and mainsail converted to slab-reefing.
New mainsail cover fitted 2017
Replacement main cockpit winches fitted 2017
New sprayhood fitted 2018.
New main hatch fitted 2018
New Cobra VHF radio fitted 2019
New engine battery fitted 2019
New tiller cover fitted 2019
New cabin table fitted 2019. (There is a separate folding table for the cockpit)
All skin fittings checked annually and a new engine intake unit fitted 2023
New genoa furler swivel fitted 2024.
The boat has been lightly used during my ownership but she has been constantly maintained
(including all varnish work) and she is in good condition. All sails are in good condition and were serviced and laundered in 2021. The engine has been regularly serviced either professionally or by the owner. The oil was changed and a new impeller and belt were fitted 2024.
All the Teak strips required to replace the cockpit wood is available and will be included in the sale.
Also available by separate negotiation is a Tinker Traveller dinghy with all sailing gear and a 3.3hp Mariner outboard engine.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.
Owners FAQ's
How long have you owned the boat for?
Since 2015
Why are you selling her?
Personal circumstances
Where have you sailed her?
The Solent & South Coast