North River Seahawk 24 Hardtop

The main engine is a Honda 250 BF250DXRA, which is capable of achieving a maximum speed of ~30 knots. The main engine has ~353 hours total running time and is equipped with a 3-blade Honda stainless steel propeller (15.75x15).

Service records are available. The engines were recently serviced by GoldStar Marine with the main engine receiving a preemptive 400 hour service.

The battery bank consists of (2) individual 12v deep cycle lead-acid batteries that can be combined or isolated. A Noco Genius 12v charger charges and maintains the batteries when plugged into 120v power.

The kicker motor is 9.9 hp Yamaha High Thrust outboard equipped with a Trollmaster remote control system.

Lectrotab trim tabs.
Hydraulic steering.

12 volt battery, 110 shore power voltage, 2 batteries charged by: engine, shore power

The length overall for moorage purposes is 30 ft with the outboard in the lowered position.

The North River Seahawk 24 features an aluminum ~30" offshore bracket.

The hull is built with 0.250" bottom plate and 35" tall 0.160" side plates, and a welded 0.190" doubler plate on the bow foredeck.

The decks are treated with factory applied grippy non-skid. The hull sides and superstructure are painted with Ruby Red Flair & Dark Charcoal Metallic paint.

Fuel tank is 100 gallons and of aluminum construction.

The hull below the waterline is bare metal. This boat has been consistently trailered, and the seller reports that she has never been on the water for anything longer than day trips.

Waterline Boats / Boatshed does not independently verify capacities and measures, which are reported from seller-provided information and/or literature.

This Seahawk 24 Hardtop can be boarded by stepping onto the swim platform and opening a hinged starboard side transom door. The aluminum decks are coated with a grey and grippy nonskid surface (factory original). The cockpit is built to fish and measures 89" long by 84" wide. Fishing features are numerous and are described in more detail in the deck gear section.

An aft steering station allows for operation from the cockpit while fishing. A Garmin multifunction display is installed for viewing sonar, chartplotter, radar or engine data.

The cabin measures 91" long and has a height of 74", and is configured with two inboard facing bench seats that can seat 1-2 people each. The bench seats flip up to access underseat storage. A porta potti is stored in the starboard bench seat and drop down curtains have been installed on the headliner for privacy. The port and starboard forward side cabin windows can be opened and are screened.

The two forward facing seats are manufactured by "Seats" and are very comfortable and highly adjustable shock absorbing seats.

The main helm station is equipped with engine controls and gauges, Garmin MFD, VHF Radio, Autopilot controller, heater control, switches, and more.

The center forward facing window doubles as a door to the foredeck -- providing direct access for mooring or anchoring. An electric windlass with below deck anchor locker is installed.

The cabin top is relatively open with a radar arch and a mounted spotlight forward, rocket launchers aft, and rails to port and starboard. Gear could be stored and secured on this cabin top, if desired.